F3 Operation instruction

Operation instruction

Thank you for purchasing our product,We are customer oriented company and strive to provide an outstanding customer care service. Any question or issue, please contact us   and we’ll answer all your product related questions and solve any arising issues promptly and accurately,E-mail: 873935813@qq.com.

I.Mode represented by the state of key indicators

The blue light is operation indicator, and red light is WIFI indicator. The concrete modes are as follows:

1. Point-to-Point mode: red lamp flashing slowly

2. Remote mode: Steady red

3. Remote is not connected to the network: Red flash quickly

If you do not know what the mode is now, press the reset button then the camera will directly switch to Point-to-Point mode.   

Description of key functions: “POWER” key is switch key, press lightly for 1s to start the camera, and press for 3s to shut down the camera;  

“OK” key is record key, press lightly for 2S to start recording, and press lightly for 2s to stop recording;  

“MODE” key is photographing key, press lightly to take a photo

“R” key is Reset key, press it in starting state until the indicator is off, which is the resetting.  

Notice: This reset key is useful only when pressed while red lamp flashes quickly or slowly，Hold down the reset button “R”button) for about 5 seconds. The indicator light of the camera will be off and then the camera will automatically reboot. After the reboot is completed,   Reset be completed.

FAQ

1.Unsmooth remote monitoring: please select proper definition according to current network environment

2.SD card fails to save file: The SD card used first must be formatted once.  

3. Failure to connect the network: Please select connection mode according to own network property.  

4. SD card video is not smooth when watched remotely using the APP: As the mobile has a limited decoding capacity, you can adjust definition of the equipment recording as fit for own mobile.  

5.Forget the password : Please directly press reset key for 5s to reset factory defaults.  

Special tips:  

1.If the network environment is changed, reset before connect to the hot spot of machine to re-configure WiFi.  

2. If the camera fails to read the memory card, please Format the memory card or replace the memory card.  

3. Before shutting down the machine, please first stop recording lest the last length of video be lost or damaged due to not saving;